How to Take Care of Your Snake Plant Outdoors

Snake Plant Outdoors – First-time gardeners should start with snake plants. As well as being very tolerant, these plants also have a low maintenance need. You may be wondering whether you can grow a snake plant outdoors, depending on where you reside. As a result of our investigation, we are able to provide an answer to your question on growing snake plants.

Yes, snake plants can be grown outside. They may be planted in the ground or in pots, according on your preferred method. Temperatures over 60 degrees Fahrenheit are necessary for snake plants to grow. When the average temperature is below 55 degrees Fahrenheit, your snake plant may not be able to thrive outside without some additional attention.

To ensure that your snake plant has the greatest possible chance of thriving, there are a few things that you should be aware of. Continue reading to find out how to get the most out of your snake plant’s outside development.

How To Grow Snake Plants Outdoors

Because of their hardiness and tenacity, snake plants are a common garden ornamental. Understanding how little water snake plants need to thrive is sometimes the most difficult part of snake plant cultivation. However, if you want to cultivate a snake plant outdoors, you’ll have to take into account a few more things. Let’s have a look at some of the most crucial points.

Light and Temperature

Snake plants have a high tolerance for light fluctuations. These creatures may thrive in both shaded and brightly illuminated places. You may place them outdoors on the patio or in the garden, although they love bright and indirect light.

Keep them out of direct sunshine, which may dry them out if they’re exposed for long periods of time. The plant’s leaves may droop and finally fall off if they are placed in regions that get no sunlight. If you want to grow your snake plant outdoors, choose a spot with a south or west facing orientation so that it receives both direct and indirect light.

A native of the West African rainforest, snake plants are tropical evergreens. As a result, they can thrive in temperatures ranging from 55 to 90 degrees Fahrenheit (USDA Zones 8 through 11). They can’t live for more than a few days at temperatures below 50 degrees Fahrenheit because of their extreme sensitivity to cold.

Water and Soil

As long as the soil is well-drained, snake plants may thrive in the open air. It is possible to grow snake plants in terracotta, porcelain, and ceramic pots. Check the pot has enough drainage holes. Soil made expressly for snake plants, cactus and succulents may also be used.

As previously said, snake plants do not need a lot of water in order to grow and thrive. They, on the other hand, need relatively little. Once the earth has dried fully, it is preferable to water the snake plant. There are several variables to consider while determining this, including the plant’s size and ambient humidity. Snake plants can last up to six weeks without water.

It’s best to keep your snake plant apart from other plants that need more regular watering if you’re going to put it in the ground (or with other tropical plants). The leaves of your snake plant will tell you if it is too dry. If the ends of the leaves are yellowing or wilting, it’s probably time to water the plant.

Snakeplant’s Re-potting

Slow-growing snake plants don’t need to be re-potted too frequently. Re-potting may only be necessary every five to ten years if you plant them in an outdoor environment with low illumination. Plants that live in areas with high light may need to be re-potted every two to five years. They love to be packed, but may adapt well when their roots are allowed to move about their pots. Your outdoor snake plant may get more crowded in the winter, but this is completely natural and has no effect on the plant’s development.

Snake Plant Pests in the Garden

Even if snake plants are cultivated in the open air, they are quite resistant to pests. Nevertheless, just like with any other home plant, if the surrounding area isn’t kept clean, insect infestations are possible. Mealybugs and spider mites are the most prevalent pests that attack snake plants. There are two different pests that may wreak havoc on the health of your snake plant, eating away at its leaves and making it wilt and ill. Using neem oil or rubbing alcohol on the plant’s leaves is the most typical method of getting rid of them.

Preventing Snake Plant Roots from Evolving

It’s very uncommon for snake plants to become aggressive when planted in the ground outside, especially in warmer regions, where they thrive. It’s possible to avoid this by doing the following steps:

• To prevent the snake plant’s roots from spreading, surround it with a variety of obstacles that are at least ten to twelve inches deep in the ground.
• Rather of planting the plant directly in the ground, use pots and bury the containers all the way to the rim of the soil. Make sure that the containers include drainage holes so that the soil is not depleted of nutrients.
• The snake plant has to be divided every two to three years.

What You Need to Know About Outdoor Snake Plant Dividing

a. Remove The Plant From The Pot

Cover the surrounding area with newspaper or a tarp. Grab the snake plant’s leaves with one hand and remove the container with the other. If feasible, remove it by squeezing the pot’s base. For stubbornly attached pots, you may need to use a tool knife to cut away excess dirt. Alternatively, you may outline the soil’s perimeter with a pencil or a chopstick, which is more safer since it prevents you from injuring the roots.

b. Cut The Pups

By separating the leaves, you should be able to break up the plant into three or four smaller parts. On the bottom of a plant, look for little pups that have a white rhizome at the bottom. Using a sterilized paring knife or gardening shears, cut off the little pups from the bases of the leaves.

c. For Pots You’ve Just Purchased

The next step is to fill your new pots with snake plant or cactus soil, allowing approximately an inch or two of space at the top of the container for drainage. Cover the snake plants in these pots with approximately an inch of dirt after they have been split. The base of the plants should be gently pressed down with the dirt.

d. Last, add water

Place the plants in a spot with low to medium illumination or approximately four feet away from a north-facing window after gently watering them to hydrate the soil. While the plants are recuperating, you don’t want them to be exposed to too much sunshine.

Growing Snake Plants Outside: What Not to Do!

On Hot Days, Misting The Leaves

Your snake plant doesn’t need to be misted. Even on the driest of days, the plant’s leaves store enough water to keep it hydrated. Misting might lead to fungal problems on the leaves of the plants.

Snake plant leaves should not be soaked. This is a garden full with drought-tolerant tropical plants. They don’t need to worry about the lack of water too much. Be careful not to water the plant’s leaves if you see symptoms of under-watering.

Temperatures Below Zero

Don’t try to grow a snake plant outside without a strategy to keep it warm in the winter. Consider utilizing a tiny greenhouse to preserve your snake plant if you want to grow it outside but live in a location where the temperature drops below 50 degrees Fahrenheit during the winter months of the year.

Obesity to Pests

Although snake plants are generally resistant to pests, this might alter if they are exposed to the elements. Planting your snake plant near other plants with pests increases the likelihood that it will be infested as well. Make careful to get rid of any bug infestations as soon as possible so that they don’t spread and ruin your plant.