Bottom Watering Plants – Watering houseplants is one of the most difficult tasks to learn when it comes to caring for them. Your plants will perish if you provide them with insufficient water. If you give your plants too much water, they will perish. It’s no surprise that both novice and seasoned houseplant parents are concerned about watering. This is where the practice of watering plants from the bottom comes in. Continue reading to discover more about the several advantages of bottom watering plants.
What Exactly is Bottom Watering Plants?
Bottom watering plants is a technique of watering potted plants that involves soaking them from the bottom up. The plant is put in a tray or container of water, and water is drawn into the pot via pores in the bottom of the pot by capillary action.
When it comes to caring for plants, knowing how to properly water them is vital. Watering should not be done on a regular timetable. Place more emphasis on your plants by checking on them once or twice a week and watering them as required. The quickest and most accurate technique to determine whether it is time to water is to insert your finger into the soil and feel how damp it is.
If the soil is dry an inch or two below the surface, it is most likely time to water. Of course, various varieties of plants have varying water requirements, so learning about the individual plants you have might be beneficial. Cacti, for example, need less water than tropical plants.
The Advantages of Bottom Watering Plants
Bottom-watering plants have a number of advantages. I use this method to water my houseplants for the following reasons.
Consistent watering for the plants. bottom watering ensures that moisture is evenly distributed across the whole mass of soil. Dry patches may occur as a consequence of top watering. However, this is not a problem when water is progressively absorbed from the bottom. You may be comfortable that your plants are receiving enough water.
The use of the method prevents splashing. Many plants are sensitive to water sprayed on their leaves. Even if your plants aren’t sensitive to moist leaves, harsh water might leave marks on their leaves. If you’re watering using a watering can, be sure not to get any water on your foliage. When watering a plant from the bottom, this problem is eliminated, as is the possibility of water accumulating in the centre of plants such as succulents or snake plants. Because water that collects in the centre of a plant might cause rot, this is detrimental.
Reduce over- and under-watering. Bottom-watering plants has been demonstrated to be an effective method of preventing both under- and over-watering.It completely saturates the soil, allowing the plant to dry out to its optimum level before you water it again.
It reduces mess over the plants and pots. I’ll confess that when I use a watering can, I’m a bit of a sloppy waterer. I have a tendency to spill water all over the plant, as well as surrounding plants and, on occasion, the table or shelf. Bottom watering helps to prevent spills and possible furniture damage by keeping the water contained in a tub or tray.
It’s simple task. Yes, watering your plants from the bottom is simple and does not require the use of any particular expertise or expensive equipment. More on it in a moment.
The Drawback of Bottom-Watering Plants
Watering plants from the bottom has few disadvantages in terms of plant health. One thing to keep in mind is that bottom watering on a regular basis may cause a buildup of minerals and excess salts in the growth medium, particularly if you’re using tap water. In order to solve this, you can water from the top of the container to flush the potting mix.
For the Bottom Water Plants, What Kind of Equipment do You Need?
The good news is that you are unlikely to need to purchase anything new in order to bottom water your houseplants. Many indoor gardeners utilize a sink or bathtub, or they set their plants in a tray, saucer, or big container, such as a rubbermaid tub or tote, to keep their plants moist and healthy. Just make sure that whatever you choose does not have any drainage holes (for example, a plant tray) and can hold several inches of water at a time.
You may also want to fill the tray or rubbermaid container with water from a big watering can. Filling a large container in a sink and then hauling it to the location where you want to set up is not a simple task. Usually, I wind up splattering water all over my carpet! Instead, position the vessel in the chosen location and fill it with water using a big watering can. You won’t need much at all! It’s just a couple of inches at the most.
When I bottom water, I also use another piece of equipment: a plant container with no holes. Once the plants have been soaked, you may use them to drain the water out of the pots. If you’re watering in a bathtub or sink that has a plug, you may remove it to drain the water away. If you’re using a rubbermaid tub, tote, or another sort of container, it’s helpful to have a place where extra water can be drained after the soaking process.
Another point to consider: make certain that the bottoms of your houseplant pots have drainage holes. If they do not, you will not be able to bottom water the plants.
What Plants Love to have Their Roots Watered from the Bottom?
Almost all of my indoor plants are watered from the bottom. My enormous plants in large, hefty pots are the one exception to this rule. I don’t want to end up with a broken back! When I’m growing herbs inside or beginning seeds under my grow lights, I also water from the bottom of the pot. I’ve highlighted a few plants below that do very well when they’re watered from the bottom.
This popular houseplant is particular about how much water it receives. First and foremost, it is sensitive to cold water and should only be watered with moderate or tepid water when possible. As a bonus, it’s a great plant for watering from the bottom up since splashing from overhead irrigation may cause stains on the leaves.
My succulent collection, as well as the variety of leaf forms and hues, has me completely enthralled. Although these plants do not need much water, when it comes time to irrigate, I water from the bottom of the pot. In the same way that watering snake plants from the top may cause rot, wetting the leaves can cause succulents to get stuck and decay.
Snake plants are among my favorite indoor plants to have around the house. They’re really simple to cultivate and may thrive in a broad variety of growth environments. Furthermore, they are forgiving if I ignore them from time to time. Snake plants, I’ve discovered, do best when watered from the bottom of the pot. As they develop, their leaves form a whorl around the plant, and if you don’t take care while watering it from the top, water may splash and accumulate in the centre of the plant. This has the potential to induce crown or root rot. Bottom watering is a simple and effective method of avoiding this problem.
I used to be perplexed as to why the white dots on the leaves of my jade plants appeared. I now understand that the marks on the plant were mineral deposits caused by water splattered on the plant when I was irrigating it with a watering can. The leaves of my jade plants are shiny and green now that I am watering them from the bottom.
Once inside my kitchen, you’ll see that a few of my favorite culinary herbs are flourishing on my windowsill and under the light of the surrounding grow lights. Parsley, basil, thyme, and rosemary are among the most important herbs to grow, and the plants need constant watering to produce a bumper harvest of tasty leaves. When it’s time to water my herbs, I set them in a tray of water to ensure that the soil moisture is equal and constant throughout. This comprehensive guide will teach you all you need to know about growing herbs indoors.
Pothos, like jade plants, may be susceptible to leaf spots caused by spraying water on the leaves. Bottom watering helps to avoid spots and maintain proper soil moisture.
Seedlings of vegetables, flowers, and herbs
Considering that I start a lot of seeds inside, knowledgeable seed starters are aware that newly sown seeds may quickly get dislodged if they are moistened from the top. As a result, I water my seed trays from the bottom for the first few weeks after they are planted. This is quite simple for me since I start my seeds in cell packs that are put in 1020 trays that do not have any holes. With the help of my watering can, I fill the tray with water, which is subsequently absorbed by the potting mix.
A step-by-step Procedure for Bottom Watering Plants
It has already been said that this is a simple watering strategy for indoor plants, as well as for container-grown herbs and even seedlings of vegetables and flowers. You’ll find a step-by-step tutorial for watering plants from the bottom of the pot below.
1st Step: Determine whether or not your plants need watering. Rather than following a timetable, I check on my plants twice a week to see whether it’s time to water them and adjust as necessary. The frequency with which you water a plant is determined by the kind of plant, the type of potting soil used, the time of year, and the indoor growth circumstances. As a result, it makes more sense to base watering on a fast soil check rather than on a timetable. Touch the surface of the soil or insert your finger about an inch into the potting mix to determine the moisture level in the soil. If the soil is dry, it’s time to water most indoor plants, regardless of their species.
2nd Step: Fill the container, sink, or bathtub with water by pouring it in or adding it to the bottom. The amount of water in the container is determined by the size of the pots you’re watering. I’ll fill the container with 1 1/2 to 2 inches of water if I’m bottom watering a number of little pots with diameters ranging from 6 to 8 inches, for example. When I’m watering bigger pots with diameters ranging from 10 to 14 inches, I’ll fill the container with 3 inches of water.
3rd Step: Place the pots or plants in a container, sink, or bathtub to keep them from becoming wet. In the event that your plants are planted in plastic pots, they may tip over and float rather than stand upright in the pool of water. Make use of less water in the container or soak the soil from the top with a watering can to provide the plant with a little weight in order to avoid this from happening.
4th Step: Soak the pots for 10 to 20 minutes. Then remove them from the water. I set a timer on my phone to remind myself. Remove them from the ground when the dirt on the surface of the soil is moistened. Depending on the size of the pot and the kind of potting mix, the absorption time will vary. Examine the container after 10 minutes to see whether the water has been completely absorbed by the plants. If so, add extra water.
5th Step: After the plants have been watered from the bottom up, the surplus water must be drained away. Alternatively, if you’re watering in a sink or bathtub, just take out the plug to drain the water. If you’re using a tray or a rubbermaid tub, take the pots and set them in another tray for 10 to 15 minutes before putting them back in.
Additional Tips for Bottom Watering Plants
I’ve been bottom-watering my plants for almost 10 years and have learned a few tricks along the way. Here are some of my favorite techniques. Several issues should be kept in mind while using this technique:
When it comes to water absorption, the kind of soil matters. As previously indicated, the type of potting mix matters. It takes longer to wet a sandy mix, such as cactus mix, than it does a lightweight potting mix.
Bottom watering is appropriate for small to medium-sized plants in pots of the same size or smaller. Larger plants, particularly those in clay pots, are heavy and difficult to handle, so I water them using a watering can to make moving them easier.
In order to fertilize your indoor plants, you may add a liquid plant food to the water they are drinking.
Containers with drainage materials: If you have houseplants in containers that include pot shards or drainage pebbles at the bottom of the pot, you’ll need to soak the pots in water until the water reaches the level of the soil. If this is not done, water will not be pulled up into the pot.